Plastic spools

Every spool type we wind, with the dimensions that decide whether it fits your metalliser. All dimensions in millimetres.

Swiftmet plastic spool programme — dimensions in mm, net wire weight in kg
Spool type	Wire net weightkg	Flange diameterD1 · mm	Core diameterD2 · mm	Bore holeD3 · mm	Width of spoolL1 · mm	Winding widthL2 · mm
SW200	2.75	200	120	38.5	80	67
SW265	6	265	120	38.5	80	67
SW265-1Wide bore version of the SW265	6	265	120	51.5	80	67
SW280	7	280	120	38.5	80	67
SW285	7.5	285	120	38.5	80	67
SW295	8	295	120	38.5	80	67
SW300	8.5	300	120	38.5	80	67
SW305	8.5	305	120	38.5	80	67
SW320	9.5	320	120	38.5	80	67
SW320-1Wide bore version of the SW320	9.5	320	120	51.5	80	67
SW320-2Narrow barrel, for machines with a shorter traverse	8.5	320	100	51.5	71	59
SW360	11.75	360	100	38.5	71	59
SW360-1Wide bore version of the SW360	11.75	360	100	51.5	71	59
SW360-3 (HW)Heavy wound: the largest spool in the programme, for the longest runs between changeovers	14.5	360	100	51.5	85	71

All dimensions in mm.

What each dimension means

Each outline is drawn from the figures in the table at a single shared scale, so the sizes can be compared by eye.

SW200
2.75 kg · Ø 200 mm
SW265
6 kg · Ø 265 mm
SW265-1
6 kg · Ø 265 mm
Wide bore version of the SW265
SW280
7 kg · Ø 280 mm
SW285
7.5 kg · Ø 285 mm
SW295
8 kg · Ø 295 mm
SW300
8.5 kg · Ø 300 mm
SW305
8.5 kg · Ø 305 mm
SW320
9.5 kg · Ø 320 mm
SW320-1
9.5 kg · Ø 320 mm
Wide bore version of the SW320
SW320-2
8.5 kg · Ø 320 mm
Narrow barrel, for machines with a shorter traverse
SW360
11.75 kg · Ø 360 mm
SW360-1
11.75 kg · Ø 360 mm
Wide bore version of the SW360
SW360-3 (HW)
14.5 kg · Ø 360 mm
Heavy wound: the largest spool in the programme, for the longest runs between changeovers